Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Using tabs


Recommended Posts

I did a curve slice on these parts to run the profile with tabs, but after milling the steps on the second side the tabs are gone. The stock is 4x7x.75 and the parts are .725. Any help would be great.

D6E8E5A3-3177-4808-A0B2-CB02AEF17705.jpeg

3 minutes ago, poolrod2 said:

I did a curve slice on these parts to run the profile with tabs, but after milling the steps on the second side the tabs are gone. The stock is 4x7x.75 and the parts are .725. Any help would be great.

D6E8E5A3-3177-4808-A0B2-CB02AEF17705.jpeg

Now that I think about it, maybe I can raise my profile chain since it’s in the middle.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...