Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

MultiAxis Deburr problems


GF8er
 Share

Recommended Posts

I have a part that was originally programmed in MC2021. I'm using the Multiaxis Deburr toolpath with a 1/8 lollipop endmill to deburr the the underside of a hole. In MC2021 this toolpath works perfect, In MC2022 I can no longer get the toolpath to generate the cuts on the underside. Attached is a MC2021 file that works correctly. If you open this file in MC2022 it will be correct until you regen the toolpath and then you will see the issue.

 

DeburrTest2021.mcam

2021

deburr2021.JPG


2022
deburr2022.JPG

Link to comment
Share on other sites
24 minutes ago, Spotterhphc said:

Sure enough you are correct. Though I won't be of any help here I did find something new? What is this Generate Toolpath toggle?

 

WHAT.thumb.png.57ccb48b491c5ca5051851a1deba2714.png

That automatically generates the toolpath when you close the window. So you don't have to click the regenerate icon after closing the window.

 

  • Like 1
Link to comment
Share on other sites

I got two out of the three profiles working in 2022 but it took me about 20 minutes to figure it out and also after a while I lost the second profile. In 2021 its almost effortless...

Gracjan

qc has been notified

Gracjan

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...