Post changed after reinstall

[Grimes]

So i reinstalled mastercam on my computer, copying the old shared mastercam folder. but my post isn't the same. it shows three G91 lines at the beginning, and won't output the work offset, it happened after opening a mastercam file from another computer, can it overwrite your post, machine definition or control definition? its a pita to manually edit the post every-time, i change something. i know where the lines are in the post, but i cant figure out what happened. 

[Leon82]

Your misc integers are not right. Check out the control def and op defaults

When you open a file and it's like that edit comon parameters and set to post defaults for misc integers

[Grimes]

On 9/2/2021 at 10:04 PM, Leon82 said:

Your misc integers are not right. Check out the control def and op defaults

When you open a file and it's like 91that edit comon parameters and set to post defaults for misc integers

that didnt work, i noticed, the parameters g90=0, g91=1 werent there. also g54=0, g55=1(im sure this is why my post wont post the work offsets)  were also gone. is there a chance i loaded a different version? im tying to figure how to pull the teeth on this and get my original posting back as usual.  also when i do a simple drill toolpath i can still edit the pecks. which was never an option before.

[Grimes]

thanks leon82, helped me find out where the problem was. had to change the misc integer 1 to a 2 and began posting my pwcs perfectally. my post is back lol.  still really have no idea what they are but thanks.