Recommended Posts

16 minutes ago, furqan said:

hi guys

how can i print 1:1 in mastercam

tia

I haven't had luck with that using any normal scaling process. What I do it make a legend 1" x 1" square on the part or area I want to print. I then print using that known size of the legend and check it with a pair of calipers. I then start adjusting the scale to match what it gave me. If the printer doesn't scale evenly in X and Y then I will figure out the skew and copy what I want to print to a different level. I then scale the skew into the area I want to print and go from there. Yes can be time consuming, but it is what it is.

  • Thanks 1

Share this post


Link to post
Share on other sites
On 9/18/2021 at 12:14 PM, furqan said:

hi guys

how can i print 1:1 in mastercam

tia

I use the "Keep Scaling" checkbox and set it to 1:1

  • Like 2

Share this post


Link to post
Share on other sites
2 hours ago, So not a Guru said:

I use the "Keep Scaling" checkbox and set it to 1:1

where do i find that option

 

Share this post


Link to post
Share on other sites
34 minutes ago, furqan said:

where do i find that option

See the attached photo. Select "Keep Scale" first then select you scale (input 1.0).

Print.PNG

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us