Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

print


furqan
 Share

Recommended Posts

16 minutes ago, furqan said:

hi guys

how can i print 1:1 in mastercam

tia

I haven't had luck with that using any normal scaling process. What I do it make a legend 1" x 1" square on the part or area I want to print. I then print using that known size of the legend and check it with a pair of calipers. I then start adjusting the scale to match what it gave me. If the printer doesn't scale evenly in X and Y then I will figure out the skew and copy what I want to print to a different level. I then scale the skew into the area I want to print and go from there. Yes can be time consuming, but it is what it is.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...