Extract Current SubProgram No Using Focas

[JamesQ]

Hi,

        I would like to retreat current Main Program No (O1111, refer attachment) and Subprogram No (O1610, refer attachment) by using following Focas script:

                Focas1.ODBPRO odbpro = new Focas1.ODBPRO();
                code = Focas1.cnc_rdprgnum(pHdl, odbpro);

                json["Current_SubProgram"] = odbpro.data;
                json["Current_MainProgram"] = odbpro.mdata;

        According to https://www.inventcom.net/fanuc-focas-library/program/cnc_rdprgnum, result of  cnc_rdprgnum should get me sub  & main program no in .data and .mdata properties. However, we found that only main program no (O1111) is returned in both properties. Anyone here encounter similar issue or have successfully extracted current Subprogram No via Focas? Appreciate if you could share me your advise and experience.

        Thank you.

 

 

 

 

Edited September 20, 2021 by JamesQ