Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

321 rs232c OSP7000-700L


Recommended Posts

I am having issues sending programs from a computer to a Okuma Crown L2060 lathe with a OSP7000-700l controller.  The machine give a "321 RS232c status time out error FFFFFFFF' read' " when trying to receive the program. I have tried to change the optional parameter bit #1, #8, and #12 that was recommended on a different thread. I am unsure how to change these values. I tried to hit set and change the value, but I get an "Impossible Error 3" display. I have attached a picture of the screen. Any help on solving the problem or how to change these parameter would be helpful.

thanks in advance,

James

MicrosoftTeams-image.thumb.png.aba7bd77b37b52339cd8a020a7948ac5.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...