Stumped.. (modeling roll die form)

[Jespertech]

After about 4 solid hours of giving it everything my primitive mind has to offer I'm waving the white flag. Usually a model would be provided with which I could reverse engineer and figure out how to go about creating this. But of course, this time around there is no model.

This is my first attempt at creating a solid with this type of feature and I don't feel too confident with my approach. 

I've included my MCAM file and 3 cropped images (  )  that pertain all the available info I have.. 

If any of you solid/surface wizards are up for a challenge  and can enlighten me on how to go about this It would be much appreciated. 

sincerely,

Man trying to get some sleep tonight and not obsess over not being able to do this! 

 

ADAPTER SHAFT.mcam

[crazy^millman]

Here is where I helped someone else with a difficult shape to model that was rolled like this one. Sorry onsite with at a customer so don't have time to dig into it.

Dropbox link

 

[Jespertech]

37 minutes ago, crazy^millman said:

Here is where I helped someone else with a difficult shape to model that was rolled like this one. Sorry onsite with at a customer so don't have time to dig into it.

Dropbox link

 

Wow, I definitely underestimated how much I could learn from that particular thread. I think this will be what I need to keep moving forward.

Thank you, I'll hopefully have a finished model to post here soon.