Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Force Spindle speed on Null tool change with multiple offsets


Recommended Posts

We have Fanuc Robo Drill Machines using the Generic Fanuc 4X Mill post and we have run into an issue with not having a spindle speed call out after the second offset. We will have multiple offsets running 1 tool and in between offsets we have a manual entry operation that probes the tool Z and diameter. After the probing on the second offset, it loses the spindle speed and needs it again. Is there any way to for spindle speed every time it outputs a new work offset?

 

Capture1.PNG.df53ddaf5a1c761b56bf6582c3cd0ce7.PNGCapture2.PNG.29a209256a6330745e65ca5cc60d6107.PNGCapture3.PNG.dc7fa86b408468b5c9e9564921453b32.PNG

Link to comment
Share on other sites

There may be a switch in the beginning to force it out,

 

Based on the way you are doing that I would go intothe prapidout post block and change the speed to *speed. It may be spelled differently I haven't look in a while.

 

Better of using a force tool change with manual entry in my opinion. You are getting lucky because the control is remembering modal commands

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...