Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

My cycle time in verify is abnormal


jean
 Share

Recommended Posts

1 minute ago, Chally72 said:

In addition to the above questions, the version you're seeing this in would be a good thing to know. There are too many possibilities to narrow it down much more without further information or the offending file

Should i send file to QTE for analysis?

43 minutes ago, Leon82 said:

Are you taping or drilling?

 

 

Both

27 minutes ago, gcode said:

how far away is Home?

It it's set some huge distance away, the time to and from home is added up with every toolchange

It runs on a tower, part home it at center of rotation. The machine home is not that far away. Its a Okuma MA-600HB

4 minutes ago, Chally72 said:

In addition to the above questions, the version you're seeing this in would be a good thing to know. There are too many possibilities to narrow it down much more without further information or the offending file

MC 2022

Link to comment
Share on other sites
9 minutes ago, JParis said:

Are you inputting your tapping info as IPR?

I have seen will calculations when doing it that way...I enter the IPM and let the post give me the IPR

JParis......Thanks that fixed it. I'm down to 45. min for OP 1..... Man before it was like 14 hrs... I was like "No Way"

:wallbash:

Thanks everyone for your input..

1 minute ago, JParis said:

Try backplotting but not picking the tap...that'll show if it's the tap or not

Yeah that what its was both feed rates and IPR where set to IPR.........

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...