Hass VM-3/Vf-3 .stl for mach sim

[Thee Rickster ™]

Good Day Ppl,

Been a while since i posted, I hope you are all doing well.

I have a VM-3 which i believe is the same as the VF-3.

I can only seem to find .X-t and .stp on the Hass sight and only for a

VF-3, assuming its the same

 

If anyone could sent me a link to where i can find the actual models

in .stl format, i will greatly appreciate it.

 

Cheers

Rick

[JParis]

Grab the files...do a "Save As" and save them as stl's   

 

you'lll likely need to scale them to metric as well, if they're not already

[AHarrison1]

30 minutes ago, Thee Rickster ™ said:

Good Day Ppl,

Been a while since i posted, I hope you are all doing well.

I have a VM-3 which i believe is the same as the VF-3.

I can only seem to find .X-t and .stp on the Hass sight and only for a

VF-3, assuming its the same

 

If anyone could sent me a link to where i can find the actual models

in .stl format, i will greatly appreciate it.

 

Cheers

Rick

Try these, I cant guarantee they will work. 

haas VF3 - VF-3_AXES_X_LG-1.STL

haas VF3 - VF-3_AXES_Y_LG-1.STL

haas VF3 - VF-3_BASE_DG-1.STL

haas VF3 - VF-3_BASE_LG-1.STL

haas VF3 - VF-3_DOOR_RIGHT_DG-1.STL

haas VF3 - VF-3_TC_SMTC_RED-1.STL

haas VF3 - VF-3_AXES_Z_AAG_DG-1.STL

haas VF3 - VF-3_AXES_Z_DG-1.STL

haas VF3 - VF-3_AXES_Z_PCOOL_LG-1.STL

haas VF3 - VF-3_DOOR_LEFT_DG-1.STL

haas VF3 - VF-3_ENCLOSURE_LG-1.STL

haas VF3 - VF-3_TC_SMTC_DG-1.STL

[Thee Rickster ™]

9 minutes ago, AHarrison1 said:

Try these, I cant guarantee they will work. 

haas VF3 - VF-3_AXES_X_LG-1.STL

haas VF3 - VF-3_AXES_Y_LG-1.STL

haas VF3 - VF-3_BASE_DG-1.STL

haas VF3 - VF-3_BASE_LG-1.STL

haas VF3 - VF-3_DOOR_RIGHT_DG-1.STL

haas VF3 - VF-3_TC_SMTC_RED-1.STL

haas VF3 - VF-3_AXES_Z_AAG_DG-1.STL

haas VF3 - VF-3_AXES_Z_DG-1.STL

haas VF3 - VF-3_AXES_Z_PCOOL_LG-1.STL

haas VF3 - VF-3_DOOR_LEFT_DG-1.STL

haas VF3 - VF-3_ENCLOSURE_LG-1.STL

haas VF3 - VF-3_TC_SMTC_DG-1.STL

 

Thank you fine Sir, that was quick and very kind of you!

 

Cheers

Rick

[AHarrison1]

No problem