Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Live 4th Axis with comp error on control


SLuong
 Share

Recommended Posts

Hello everyone,
   I am programming live 4 axis with WEAR turned on as 3D CONTOUR.  However, it has an alarm the the following line (see imabe).  My question is where is the best for me to put G41 Dxx value?  I also tried to use the standard post they they have the same problem.

 

 

 

Thanks,
    S.Luong

========================== G-CODES =====================

NT22(FINISH WALLS, THRU*, CUT#3)
G0 G17(XY PLANE) G40 G80 G90 M19
G30 P2(ZY HOME)
G0 G90 A-8.032(A INITIAL ROTATION)
G116 T22(.5, 1/2 BULL EM, .031RAD, , FIN, TiNC,)
G90 G15 H1(WOS) X-2.2157 Y0.
S4000 M3
G56(TLO) HA DA(D22) Z5.(DOC= Z.8125, .0625 THRU)
M8 A-8.032
Z1.125
G1 Z.8125 F5.
G41 D22 X-1.7158 A-7.534
X-1.6962 A-7.427
X-1.6773 A-7.145
X-1.6593 A-6.697 F572.96
X-1.6427 A-6.094
X-1.593 A-.249
(CUTTING...)
X-1.6787 A366.927
X-1.6977 A367.196
X-1.7172 A367.291
G40 X-2.2172 A367.464
G0 Z5. A367.466
A367.464
M9
G30 P2(ZY PULL IT UP)
M5
G0 G90 A0.(A HOME)

20211215_155914.thumb.jpg.d3127baeff53e39233db0afe12ff31b3.jpg

 

Wear.png.c000688db4993f2aa7db5c33220fd9da.pngLive4.png.c202b932ff77ceaee5b100200ccaa1a0.png

 

Link to comment
Share on other sites
1 hour ago, crazy^millman said:

You need a lead in move that is not outputting the A move. Trick is using Axis sub and not getting the A move on that line. Have you tried and perpendicular move in and out and posted the code?

Not a Posting Topic this is more of an Industrial Topic not that anyone really cares anymore.

I did as PERPENDICULAR and below here are the codes.  Still got an alarm...

 

NT22(FINISH WALLS, THRU*, CUT#3)
G0 G17(XY PLANE) G40 G80 G90 M19
G30 P2(ZY HOME)
G0 G90 A14.553(A INITIAL ROTATION)
G116 T22(.5, 1/2 BULL EM, .031RAD, , FIN, TiNC,)
G90 G15 H1(WOS) X-1.9877 Y0.
S4000 M3
G56(TLO) HA DA(D22) Z5.(DOC= Z.8125, .0625 THRU)
M8
Z1.125
G1 Z.8125 F5.
G41 D22 X-1.628 A-5.349 F572.96
X-1.6156 A-4.481
X-1.6056 A-3.513
X-1.5984 A-2.468
X-1.5942 A-1.37
X-1.593 A-.249
X-1.594 A3.323
X-1.5977 A7.101
X-1.6036 A10.869
X-1.6119 A14.623
X-1.6226 A18.357
X-1.6398 A23.417
X-1.6688 A30.491
X-1.7918 A56.402
X-1.825 A64.406
A115.621

Link to comment
Share on other sites
16 hours ago, SLuong said:

I did as PERPENDICULAR and below here are the codes.  Still got an alarm...

 

NT22(FINISH WALLS, THRU*, CUT#3)
G0 G17(XY PLANE) G40 G80 G90 M19
G30 P2(ZY HOME)
G0 G90 A14.553(A INITIAL ROTATION)
G116 T22(.5, 1/2 BULL EM, .031RAD, , FIN, TiNC,)
G90 G15 H1(WOS) X-1.9877 Y0.
S4000 M3
G56(TLO) HA DA(D22) Z5.(DOC= Z.8125, .0625 THRU)
M8
Z1.125
G1 Z.8125 F5.
G41 D22 X-1.628 A-5.349 F572.96
X-1.6156 A-4.481
X-1.6056 A-3.513
X-1.5984 A-2.468
X-1.5942 A-1.37
X-1.593 A-.249
X-1.594 A3.323
X-1.5977 A7.101
X-1.6036 A10.869
X-1.6119 A14.623
X-1.6226 A18.357
X-1.6398 A23.417
X-1.6688 A30.491
X-1.7918 A56.402
X-1.825 A64.406
A115.621

Yes I was thinking it might be the case using that toolpath. Might try Curve 5 Axis in a 4 Axis output.

Link to comment
Share on other sites
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...