Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

SHORTEST INDEX ROTATION???


Recommended Posts

Hello support,
    I have OKUMA INDEXER such as taking + and - degrees or ABSOLUTE.  Somehow my post spits out as a COMPLETE TURN whereas the index built-in MACRO SHORTEST rotation such as A70,  A113 from A0, left turn and right turn. 

    My post as ONE WAY turn such as A70° and all the way to A247° of which is the same but not turning to the side such as: A360°-A247° = A113°, same as above.  My question is which section of the post that I can make it going to A113° instead of A247°?


Thank you
=========================
NT21(SPOT 4X .380 THRU HOLES, CUT#7)
G0 G17(XY PLANE) G40 G80 G90 M19
G30 P2(ZY HOME)
G0 G90 A70.(A INITIAL ROTATION)
G116 T21(.25, 1/4 SPOTTER - 140° 140.°, CBD, 140.°)
G90 G15 H2(WOS)
X-.835 Y.0241
S1500 M3(SPOT DRILL CYCLE)
G56(TLO) HA Z3.5(DOC= Z.475)
T3(OKUMA NEXT TOOL WAITING)
M8(ADOC=.025DP)
G71 Z3.5(CORRELATES M53)
Z.625(RETRACT)
G81 Z.475 R.625 F5. M53(READS G71=G98)
X-2.785
X-4.735
X-6.685
X-8.635
G80
G0 G90 Z3.5(OKUMA DRILL CLEARANCE)
M9
(*)
(PROGRAM JUMPS HERE)
(FROM A70.° TO A247.°)
(*)
NT2102(SPOT 4X .180 THRU HOLE, CUT#8)
(.25, 1/4 SPOTTER - 140° 140.°, CBD, 140.°)
G0 G90 G15 G17(XY PLANE) H2(WOS)
X-4.515 Y0.
S1500 M3(SPOT DRILL CYCLE)
A247.(INDEX MID ROTATION)   =========================> Should be A113° 
G56(TLO) HA Z3.5(DOC= Z.475)
M8
G71 Z3.5(CORRELATES M53)
Z.625(RETRACT)
G81 Z.475 R.625 F5. M53(READS G71=G98)
G80
G0 G90 Z3.5(OKUMA DRILL CLEARANCE)
M9
G30 P2(ZY PULL IT UP)
M5
M1

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...