Change at Point

[Wondermill]

1) Warning- 3D contour w/ comp. in computer off) does not output change at point information. Change(s) will be ignored. 

Trying to fix one little move I dont like in a surfacing path.

Saved toolpath geometry. 
Generated a 3d contour using that geometry directly.
But now all my rapids and approaches are feeds.  Other comp settings destroy the toolpath.  
Left Compensation at Off and added Changes at points in the geometry. 

I get the attached error.

It would be great if this worked this way. 

Anyone know a similar way to manually override these things giving us as much control as this would if it worked? 

Thanks in advance.

 

 

 

 

 

 

 

 

[crazy^millman]

Have you tired the toolpath editor for the operation? I will do that from time to time to remove an bad point or section from them.

[Wondermill]

Delete pass worked wonders here, Thanks Ron!  Never used the toolpath editor before, didn't even know it existed. 

[crazy^millman]

1 minute ago, Wondermill said:

Delete pass worked wonders here, Thanks Ron!  Never used the toolpath editor before, didn't even know it existed. 

Glad to help. Thank you for letting me know I appreciate it.