Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Rough toolpath


mirek1017
 Share

Recommended Posts

Hi,

I am working with mcam 2022(your file is mcam 2021) and this file can be opened in mcam2021 without toolpath, but anyway:

1) Ball mill remain between passes some ribs ( you can measure rib on verify tab in simulator) , it's ok, but in this case , tool need little bit more micro lift distance for jumping safely between passes. I was change it to .1 except .01 and this change resolve all collision. 

image.png.aaecf9ded0fc2e186e5435a78a6a01ec.png

2) In the raster op , I am use previous op for stock remaining and this cleans all material very good.image.thumb.png.a8ac223d9104486cd0e2bf917f18cedb.png

It's all.

Good luck!

Sincerely,

Michael.

P.S. When sending file, please don't zip all your pc, only needed files. Thank's.

image.png

t-10-1384-212 fix new 3d mcx -fnl-frm-pun-rev-b.zip

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...