Fanuc Generic 3X mill Tool change issue

[ThisGuy]

Hi people,

 

I've just downloaded the Fanuc Generic 3X mill post from the Tech Exchange, and it works fine except one little thing:

N100 G21
N102 G0 G17 G40 G49 G80 G90
N104 T1 M6 <---- T1 and M6 should be on separate lines. It seems to first want to call the tool in magazine and then do the actual tool call.
N106 G0 G90 G54 X-75. Y-10. S1000 M3
N108 G43 H1 Z175.
N110 M8
N112 Z160.
N114 G1 Z150. F600.

I have no experience in making or editing post processors at all, but it seems like this should not be too hard.. until i open the post and cant make sense of it.

is there anyone who could help me with this?

 

[ThisGuy]

Alright so to my own surprise I figured it out.

Instead of:

 pbld, n$, *t$, sm06, e$

It should be:

 pbld, n$, *t$, e$
 pbld, n$, sm06, e$

[JParis]

Yup, that's how you do it  

[crazy^millman]

36 minutes ago, ThisGuy said:

Alright so to my own surprise I figured it out.

Instead of:

 pbld, n$, *t$, sm06, e$

It should be:

 pbld, n$, *t$, e$
 pbld, n$, sm06, e$

Good old fashioned trial and error.