one way filtering How to use

[TWu]

How to use one way filtering Tried a lot of images but don't know how to use

 

  thanks

[Matthew Hajicek - Singularity]

I just turn it on and leave it on.  What it does, is if you're doing a raster type path zigzagging back and forth, it will start the filtering from the same end of the path regardless of the direction of tool travel.  That way entity endpoints line up better, and depending on your tolerance settings, high feed codes, and machine dynamics, it can produce a better surface finish.  I've never seen any reason to have it turned off.

[TWu]

20 小時前，Matthew Hajicek - Singularity 說：

我只是打開它並保持打開它的狀態。和機器動力，它可以更好的表面光潔度。我從來沒有看到任何關閉。

 

 

謝謝你的回复，按照你的方法，但還是一樣，能不能給個簡單的例子供參考。

[Matthew Hajicek - Singularity]

Hmm, doesn't seem to be working for you.  Maybe send that to your dealer.

[TWu]

7 hours ago, Matthew Hajicek - Singularity said:

嗯，好像不適合你。也許把它寄給你的經銷商。

Okay thank you