toolpath tranform

[Zorander]

hi guys!

if not use subprogram,  how to use translate, mirror, rotate,  from post parameter.  i want to get the param, and add commet.

thanks everyone!

[JParis]

an you share a file or z2g showing a few toolpaths and how you use the transofrm function....if you could provide a marked up/edited copy of how you want it to look so it can be compared to what you are currently getting when you post process?

That would be most helpful

 

[bd41612]

See my post from May 23... maybe this will help.

https://www.emastercam.com/forums/topic/104375-xform-rotate-count-instances/#comment-1331158