Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

MPMaster post for a Haas vf5ss?


Smit
 Share

Recommended Posts

We're getting ready to purchase a new Haas vf5ss machine and i was wondering if the MPMaster post would be OK or would it be best to purchase a post from our dealer?

We do have an older model VF-8 and it works OK but there might be some bells and whistles we're missing out on if we don't have a custom post.

Thanks for any opinions shared.

Link to comment
Share on other sites
3 hours ago, Smit said:

We're getting ready to purchase a new Haas vf5ss machine and i was wondering if the MPMaster post would be OK or would it be best to purchase a post from our dealer?

We do have an older model VF-8 and it works OK but there might be some bells and whistles we're missing out on if we don't have a custom post.

Thanks for any opinions shared.

Fresh from the Tech Exchange, these should support the Haas High-Speed Modes, with the Misc Integers and Real Numbers, to give you G187 P1-P3, and to control the E corner rounding values. I recommend:

G187 P1 E0.04, G187 P2 E0.008, G187 P3 E0.004 > Generic Tolerance parts

G187 P1 E0.02, G187 P2 E0.004, G187 P3 E0.0004 > Medium Tolerance parts

G187 P1 E0.01, G187 P2 E0.002, G187 P3 E0.0002 > Tight Tolerance parts

 

Generic Haas 3X Mill.mcam-content Generic Haas 4X Mill.mcam-content

  • Thanks 2
  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...