How to create a axis in mastercam lathe

[dhamotharan]

Example 1 mm of chamfer 

X50. Z1. 

G1 x52. Z-1. F. 1 

A axis 

X50. 

G1 X52. A-135. F. 1 (WE NEED THIS TYPE OF POST) HELP ME FRIENDS THANK YOU❤

 

 

[JParis]

For a post, contact your reseller

[gcode]

9 hours ago, dhamotharan said:

WE NEED THIS TYPE OF POST) HELP ME FRIENDS THANK YOU❤

Go to Mastecam.com

Create an account and go to the Tech Exchange

There are over 200 free posts available to licensed Mastercam users .

including C axis lathe posts. It's but moments work to change the "C" to "A"

 

[dhamotharan]

I have no license please share file u have?? 

[Chris In-House Solutions]

@dhamatharan please see the eMastercam Forum Rules & Guidelines here: https://www.emastercam.com/forum-pages/forum-guidelines/

If you want to contact a Mastercam reseller to get a license of the software you can locate a reseller here: https://www.mastercam.com/find-a-reseller/

[So not a Guru]

That's what I call a bold pirate!

[dhamotharan]

Not a pirate  

 

My company using mastercam

He is don't share mastercam license details ok

5 hours ago, So not a Guru said:

That's what I call a bold pirate!

Not a pirate  

 

My company using mastercam

He is don't share mastercam license details ok

 

 

So please close your mouth   

[#Rekd™]

26 minutes ago, dhamotharan said:

Not a pirate

Well if that is the case you can easily contact your re-seller to purchase a Post Processor or Log onto Mastercam.com and download one (this requires linking your license).

 

[dhamotharan]

K bro we will try