Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

renumbering tools


Doug Funny
 Share

Recommended Posts

In my experience this usually happens when I am using multiple Toolpath Groups under one Machine Group. I noticed under certain conditions it will start generating more duplicate tools everytime you renumber them too. All I can say that has helped me is be careful if you are dragging operations from on Machine Group to another when they ask "a similar tool exist would you like to add another....or use the existing one?" say yes and use the existing one. Yeah even with that being said I have renumbered and still had extra show up after being careful....I am not certain what causes this but am looking forward to seeing a real answer

Link to comment
Share on other sites
2 hours ago, [email protected] said:

In my experience this usually happens when I am using multiple Toolpath Groups under one Machine Group. I noticed under certain conditions it will start generating more duplicate tools everytime you renumber them too. All I can say that has helped me is be careful if you are dragging operations from on Machine Group to another when they ask "a similar tool exist would you like to add another....or use the existing one?" say yes and use the existing one. Yeah even with that being said I have renumbered and still had extra show up after being careful....I am not certain what causes this but am looking forward to seeing a real answer

Thanks, that's what I was thinking about the multiple toolpath groups but, wasn't sure

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...