Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

ANYONE have any experience with Niles-Simmons N20 MC Turn-mill ?


CEMENTHEAD
 Share

Recommended Posts

We've got an 2 channel N30 in house. We find it to be a capable machine that we are currently using to do some 5 axis turning and milling. If you have some specific questions feel free to reach out to me.

 

We were able to get a 2 channel Mastercam post built for the N30(while we awaited final delivery of our NX post) so I'm not sure what aspect of the N20 control is not supported by your Mastercam post builder. We found the biggest hurdle was getting the post builder to use the Niles Cycles rather than Cycle 800 for example. Much of that boiled down to poor communication on our part.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...