Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Error in drafting


Werktuigbouwer
 Share

Recommended Posts

Hello,

In my shop we have one PC where we cannot draft. The start and endpoint can be selected, but setting it to its correct place is not possible.

It ask to Select another dimension to use its formatting, see picture. Selecting another dimension is also not possible (i tried). Also the pop-up menus of Font, Height etc. are also not working. Other PC's are fine.

I also removed the Mastercam folder within documents, and in the shared folder.

-Mastercam version 2018

What could i try next?

758363776_Errordrafting.jpg.f2e29e5ccc27f2fa340b024e0514d39f.jpg

Greetz Jan

Link to comment
Share on other sites

Thank you for the input, but i made sure a long time ago, that these settings where set.

After some other strange errors i found out that some key on the keyboard was stuck (not visible by eye).

By pressing all the keys multiple times the errors went away.

Tomorrow i am going to buy some spare keyboards.

So problem solved.

  • Like 2
Link to comment
Share on other sites
49 minutes ago, Werktuigbouwer said:

Thank you for the input, but i made sure a long time ago, that these settings where set.

After some other strange errors i found out that some key on the keyboard was stuck (not visible by eye).

By pressing all the keys multiple times the errors went away.

Tomorrow i am going to buy some spare keyboards.

So problem solved.

Wow, good find!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...