Circle mill 5 axis thru Camplete

[Leon82]

When I do a circle Mill 5 axis I'm using a line I believe for orientation. Camplete posts out of g43 tilted work plane but it's turning cutter comp on on the z move for the helix.

 

I have Track cutter comp mode in the files setting on Camplete checked.

 

This is giving me a warning a cam fleet but a simulates fine I haven't actually run it on the machine yet. Has anyone had this before?

[cncappsjames]

What's the CAMplete warning?

[Leon82]

28 minutes ago, cncappsjames said:

What's the CAMplete warning?

It's for turning cutter comp on in a z move. It doesn't stop the simulation 

Just now, Leon82 said:

It's for turning cutter comp on in a z move. It doesn't stop the simulation 

Feed plane is .03 incremental and top of stock it .02 incremental 

[cncappsjames]

You could switch it to a 5-Axis path in CAMplete and it should kick out a G41.2/G42.2 then Z should not alarm the machine. CAMplete will still issue a warning but the machine should run it.