Surfaces Tutorials

[Doug Funny]

Greetings All,

Are there any good tutorials for surfaces, in particular creating a single surface from multiple surfaces? I've been playing with surfaces a little bit and have had moderate success.  We don't do a lot of 3 axis work, primarily just doing blends so, we did buy the 3 axis module. 

[JParis]

You may have to go WAY into the training manuals, pre-V9...to find that kind of info any more...

More or less, you can peel off edge curves, and using, Netsurface, Coons, Loft, Sweep...the Help file is somewhat reasonable of utilizing each of the different surfacing types...

BTW, where in Nah' Hampsha'

[#Rekd™]

The In-House Mill Advanced Tutorials cover some surface creation. Tutorial 4 covers Revolve, Loft, Draft, fillets and 3 fillet blends.

 

 

[Doug Funny]

27 minutes ago, JParis said:

You may have to go WAY into the training manuals, pre-V9...to find that kind of info any more...

More or less, you can peel off edge curves, and using, Netsurface, Coons, Loft, Sweep...the Help file is somewhat reasonable of utilizing each of the different surfacing types...

BTW, where in Nah' Hampsha'

Thanks, Where might I find pre-V9 manuals? I think V9 is the oldest they have on this site?

 

FYI, I live in Nashua (unfortunately) but, I grew up in Litchfield...

21 minutes ago, #Rekd™ said:

The In-House Mill Advanced Tutorials cover some surface creation. Tutorial 4 covers Revolve, Loft, Draft, fillets and 3 fillet blends.

 

 

Thanks,

I just downloaded all the 2023 courseware manuals and starting to go through them now. I'm a little slow so, it will be a good time to hone my skils