Flow waterjet

[mtynes]

we JUST purchased a post for the flow water jet. But are having problems getting the flow water jet to accept the parts (no graphics are showing in the flow controller) with tool path the only thing it will post is a line thats all we can see and that won't do any cutting work. Help if you can.

[JParis]

I would say going to the people that wrote the post is the next step..

If you've figured out what the machine needs then go to the post people and give them that info...

If you don't know what the machine needs then you need to get with the machine people to figure that out first

[Leon82]

It may want an R instead of a I and J depending on the controller.