Inconsistent number of syncs

[Doug Funny]

Greetings All,

Doing some tutorials while I'm slow and one of the exercises is a 2D blend mill. It's giving me an error that says "inconsistent number of syncs" . I've tried rechaining a few times. My chains look like what's in the book. What should I be looking at? Our internet is down right now so, I can't share my file at the moment...

TIA 

Doug

 

 

 

[JParis]

If you're using 2 chains with syncing set, try turning the sync'ing off...generally it means that you have a sync type setup and it can be as simple as 1 chain has 12 points and the other has 14....

With "ugly" geometry, I will sometimes chain them and turn them into a spline

There's a couple things there to check

[Doug Funny]

12 minutes ago, JParis said:

If you're using 2 chains with syncing set, try turning the sync'ing off...generally it means that you have a sync type setup and it can be as simple as 1 chain has 12 points and the other has 14....

With "ugly" geometry, I will sometimes chain them and turn them into a spline

There's a couple things there to check

Thank you sir, that did the trick!