G91 G28 Y0

[mirek1017]

Good morning all ,I want to add line G91G28Y0  for end my operation ,this is some settings on mastercam or inside off post ?

this is 3 axis standard mori seiki  post 

thank you 

[JParis]

Look in the Pretract area....that's where you'll find where it should go.

 

[mirek1017]

         

pretract        #End of tool path, toolchange
      phsm_off
      sav_absinc = absinc$
      absinc$ = one
      sav_coolant = coolant$
      coolant$ = zero

#      if nextop$ = 1003, #Uncomment this line to leave coolant on until eof unless
#        [                 #  explicitely turned off through a canned text edit
        if all_cool_off,
          [
          #all coolant off with a single off code here
          if coolant_on, pbld, n$, *sall_cool_off, e$
          coolant_on = zero
          ]
        else,
          [
          local_int = zero
          coolantx = zero
          while local_int < 20,
            [
            coolantx = and(2^local_int, coolant_on)
            local_int = local_int + one
            if coolantx > zero,
              [
              coolantx = local_int
              pbld, n$, scoolantx, e$
              ]
            coolantx = zero
            ]
          coolant_on = zero
          ]
#        ]

      #cc_pos is reset in the toolchange here
      cc_pos$ = zero
      if convert_rpd$ = one,
        [
        gcode$ = one
        feed = maxfeedpm
        ipr_type = zero
        ]
      else, gcode$ = zero
      pbld, n$, sccomp, *sm05, psub_end_mny, e$
      pbld, n$, sgabsinc, sgcode, [if gcode$ = 1, sgfeed], *sg28, "Z0.", [if gcode$ = 1, feed], scoolant, e$
#      if lock_codes = one & rot_on_x, pbld, n$, *sunlock, sunlockcomm, e$
#      pbld, n$, *sg28, "X0.", "Y0.", protretinc, e$
#      if lock_codes = one & rot_on_x & cuttype = 0, pbld, n$, *slock, slockcomm, e$
      if abs(fmtrnd(cabs)) > 360 & nextop$ <> 1003 & not(index),
        [
        if lock_codes = one, pbld, n$, *sunlock, sunlockcomm, e$
        rotretflg = 1
        pbld, n$, `sg28, protretinc, e$
        rotretflg = 0
        if lock_codes = one & cuttype = 0, pbld, n$, *slock, slockcomm, e$
        ]
      absinc$ = sav_absinc
      coolant$ = sav_coolant
      uninhibit_probe$
   this sections ???

 

[JParis]

6 minutes ago, mirek1017 said:

this sections ???

Yes..

 

I would think right in between here will get what you want

  pbld, n$, sccomp, *sm05, psub_end_mny, e$

   pbld, n$, *sg91, "sg28, "Y0.", e$   <-----------------added here

      pbld, n$, sgabsinc, sgcode, [if gcode$ = 1, sgfeed], *sg28, "Z0.", [if gcode$ = 1, feed], scoolant, e$
#      if lock_codes = one & rot_on_x, pbld, n$, *sunlock, sunlockcomm, e$
#      pbld, n$, *sg28, "X0.", "Y0.", protretinc, e$
#      if lock_codes = one & rot_on_x & cuttype = 0, pbld, n$, *slock, slockcomm, e$
      if abs(fmtrnd(cabs)) > 360 & nextop$ <> 1003 & not(index),
        [
        if lock_codes = one, pbld, n$, *sunlock, sunlockcomm, e$
        rotretflg = 1
        pbld, n$, `sg28, protretinc, e$
        rotretflg = 0
        if lock_codes = one & cuttype = 0, pbld, n$, *slock, slockcomm, e$
        ]
      absinc$ = sav_absinc
      coolant$ = sav_coolant
      uninhibit_probe$

[mirek1017]

thank you JParis 

[mirek1017]

Good morning ,the other issue 

how I can off (next tool call ) in standard 3 axis hass postprocesor ?

thank you 

[crazy^millman]

9 minutes ago, mirek1017 said:

Good morning ,the other issue 

how I can off (next tool call ) in standard 3 axis hass postprocesor ?

thank you 

 

In the control definition.

[JParis]

As Ron notes, in the control def

 

 

[mirek1017]

thank you  so much 

G00 G17 G90 G54 X-1.9 Y-.8251 S2200 M03
G43 H2 Z.25 M08
Z.2   __________coolant here 
G94 G01 Z0. F150.
X7.15 F30.

 

what about the coolant ,I want to get in 2nd z position 

[crazy^millman]

Then scoolant has to be removed from the toolchange and null tool change section of the post unless there is a switch to not use it in either section which I doubt that post has. That looks like some form of a Postability Post that Dave Thompson wrote.