Offset Chain Roll Corner

[JKLINE]

Is there a way to specify what a 'corner' is?

The white line is my starting line and I offset 0.002" both directions for the green and 0.0005" both directions for the pink.

Sometimes it rolls the corners and sometimes it doesn't.

In the photo I've provided it shows that the green was rolled but the pink was not. This becomes an issue when we draft surfaces from the green (makes a pretty round edge) and when we draft surface the pink (have to manually Two Surface Blend).

Is there a way to roll everything? Even things that aren't 'corners'?

var upperChainLarge = chain.OffsetChain2D(OffsetSideType.Right, .002, OffsetRollCornerType.All, .5, false, .005, false);

 

 

 

[Roger Martin from CNC Software]

chain.OffsetChain2D in the NET-Hook API is doing what you can via Mastercam’s UI with (Wireframe) Offset Chains.
If there is something you can do via the Offset Chains UI that cannot be done with a NET-Hook, let us know and we will investigate.
 

[JKLINE]

For my desired result, would you suggest RollCornerType.None and then fillet all entities?