Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Toggle Toolpath Display issue


nperry
 Share

Recommended Posts

  • nperry changed the title to Toggle Toolpath Display issue

The entirety of "Tool Display" is messed up...

I open a file, ALT+T will toggle it off/on.....after a bit I toggle it and nothing happens...

I've checked settings, it isn't that becasue if I close Mastercam and re-open, it again functions, as it has for years, for a little while...then it's rinse & repeat

Link to comment
Share on other sites
On 12/6/2022 at 1:02 PM, JParis said:

The entirety of "Tool Display" is messed up...

I open a file, ALT+T will toggle it off/on.....after a bit I toggle it and nothing happens...

 

can confirm.  I constantly have to go to config and click the check box to display toolpaths. Yes my config is also write protected. 

image.thumb.png.ba750905427d879681f5214cdcaf386f.png

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...