DRILLING PARAMETERS

[mirek1017]

Hello All

How I can disable my subsequnt  pack and my pack clearance  in my post 

 

 

 

 

 

 

[Colin Gilchrist]

Edit the Control Definition File. You can put "" (a set of two Double-Quote Characters) to disable the field. Make sure the Post file is closed when you do this, because the Control Definition "writes" to the Post File Text Section.

[mirek1017]

Thank you Colin 

[BehindYou]

Greetings Mirek1017

If you like there is another way to remove peck2$ and peckclr$

First create new variable 
peck_cle  : 0   (or choose some other name)

Now go to your peck postblock in my case lpack$ (if mill mpack$)
and add 
      pcan1, pbld, *sgdrlref, pgdrlout, pxout, pyout, pzout,
        prdrlout, peck1$, [if peck_cle = 1, peck2$, peckclr$], dwell$, pffr, strcantext, e$

What it means, if your peck_cle variable = 1 you will get output for peck2$ which is subsequent peck and for peckcir$ which is Peck clearance
If you don't want output for  for those two things just set value of peck_cle variable to 0

If you have more questions feel free to ask.

Kind regards

[mirek1017]

On 5/22/2023 at 11:40 PM, BehindYou said:

Greetings Mirek1017

If you like there is another way to remove peck2$ and peckclr$

First create new variable 
peck_cle  : 0   (or choose some other name)

Now go to your peck postblock in my case lpack$ (if mill mpack$)
and add 
      pcan1, pbld, *sgdrlref, pgdrlout, pxout, pyout, pzout,
        prdrlout, peck1$, [if peck_cle = 1, peck2$, peckclr$], dwell$, pffr, strcantext, e$

What it means, if your peck_cle variable = 1 you will get output for peck2$ which is subsequent peck and for peckcir$ which is Peck clearance
If you don't want output for  for those two things just set value of peck_cle variable to 0

If you have more questions feel free to ask.

Kind regards

Thank you so much ,let me try it ?

[Tim Johnson]

On 5/24/2023 at 7:15 AM, mirek1017 said:

Thank you so much ,let me try it ?

You're better off following Colin's suggestion. Why write added code when you can just turn it off.

[mirek1017]

On 5/19/2023 at 9:11 AM, Colin Gilchrist said:

Edit the Control Definition File. You can put "" (a set of two Double-Quote Characters) to disable the field. Make sure the Post file is closed when you do this, because the Control Definition "writes" to the Post File Text Section.

Hello  Colin ,I am sorry Can you pointing me closer what I shod do in control deff ?

 

 

 

 

[Colin Gilchrist]

Down at the bottom of the Topics List, is a section called "Text". The Text section is where you can rename the drill cycles, or parameter names, or disable with a set of two double quote characters ("").

[mirek1017]

Thank you