Can i get some hlep to change A axis to B axis ?

[Ivan2003]

So heres whats going on . I am trying to convert a realy old post from DMG DMU 50 to work with a brand new spinner u630 but what are my problems . The dmu is tilting the table on A axis and this spinner is tillting it on B axis . Plus that the C axis adds 90 degrees more . It doesent rotate on 90 degrees when it has to . It goes to 180 degrees . Before somen says to contact my local resseler in Bulgaria we dont have one anymore . Can i get some help about this ? I cant attach the post due to the rules here ...

[#Rekd™]

35 minutes ago, Ivan2003 said:

Before somen says to contact my local resseler in Bulgaria we dont have one anymore . Can i get some help about this ? I cant attach the post due to the rules here ...

You can post a Ziptogo and it is not breaking any rules. 

[Ivan2003]

Whell , here it is . By the way i tried some changes (not on this file) . I tried to change:

aabs->babs

ainc->binc

ag80->bg80

aia-bia

rot_on_x->rot_on_y

sav_rot_on_x->sav_rot_on_y

pfaout->pfbout

didnt worked ....

I have made some small moOT5AX.ZIPdifications to the atached post . Every modified line has #(!)(what was the original value )

[#Rekd™]

It looks like the post is encrypted, it has DAT initials so it was worked on by Dave back in his In-house days. 

Possibly someone from In-House will chime in on how to get it updated through a reseller near your area.