Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

haas V5 cutter comp / 3d contour


ChrisH
 Share

Recommended Posts

I’m Programming for a hass and trying to cut a 3d contour with G41 cutter comp with Mastercam 9.1 and the mill gets a comp error. This is a exp.

 

code:

N16218T3M6(T3 - 2D-CONTOUR - 25.4 DIA)

N16220H3Z225.6508

N16222M3S450

N16224G0X-4.2324Y57.956

N16226M8

N16228Z128.6508

N16230G1Z85.6671F400.

N16232G41X14.8166Y58.1511F150.

N16234X21.1267Y58.2157

N16236G2X21.2611Y58.2163I.1351J-13.1994

N16238G1X45.3105Y58.2176Z84.948

N16240X57.3353Y58.2182Z84.5951

N16242X69.3477Y58.2189Z84.2427

N16244X69.3601Z84.2423

N16246X72.5303Y58.219Z84.1501

N16248X75.3726Y58.2192Z84.0686

N16250X78.1691Y58.2194Z83.9933


I can't see anything wrong with it.

headscratch.gif

Link to comment
Share on other sites

%

O777 (TEST )

(TEST )

(DATE - 27-08-05 TIME - 10:08 )

( 3/8 FLAT ENDMILL TOOL - 2 DIA. OFF. - 2 LEN. - 2 DIA. - .375 )

G20

G0 G17 G40 G49 G64 G80 G98 G90

G0 G90 G54 X0. Y1.3988 S4074 M3

G43 H2 Z1.

M8

Z.9863

G1 G41 D2 X-.2438 F39.1

G3 X0. Y1.155 I.2438 J0.

G1 X1.7419

G2 X1.7569 Y1.14 I0. J-.015

G1 Y.946

G2 X1.7546 Y.938 I-.015 J0.

X0. Y-.0266 I-1.7546 J1.1134

X-1.7546 Y.938 I0. J2.078

X-1.7569 Y.946 I.0127 J.008

G1 Y1.14

G2 X-1.7419 Y1.155 I.015 J0.

G1 X0.

G3 X.2438 Y1.3988 I0. J.2438

G1 G40 X0.

G0 Z1.

M5

G49 Z1.

G91 G28 Z0. M9

M30

%

 

Here is a sasmple for a haas I get using cutter comp. Notice The D for your cutter dia on the G41 line.

 

cheers.gif

Link to comment
Share on other sites

If the D was called before then it would default to the last one run in the program if you have not called one for that tool which it looks like you have not. So if you by chance have D3 for T2 if you post is not set to force out a D at toolchanges then it would not give you one here and would give you an alram because it is too big or too small which probaly saved your but.

 

HTH

Link to comment
Share on other sites

code:

N650M06T03H03

N652G00X-258.075Y142.61M08

N654S450M03

N656G43Z193.387

N658Z96.387

N660G01Z55.361F400.

N662G41D03X-239.025Y142.684F150.

N664X-232.569Y142.709

N666X-229.34Y142.72Z55.355

N668X-227.724Y142.725Z55.354

N670X-226.108Y142.73Z55.344

N672X-224.493Y142.734Z55.353

I had a G41D03 in the program I took it out trying different things and forgot to put d03 back before I posted it on the forum. It still will not run with a D03 and .236mm in the mill comp.

I didn't know if you can keep cutter comp on with an X Y and Z move.

I'm going to take the haas book home today see if I can find some more on what the comp limits are. For now I’ll just change the program to match the regrind cutter. wink.gif

Link to comment
Share on other sites

ok I found the problem I can't find a fix. I changed my linearization tolerance up to .1mm and it still puts in this small move (last line on the code Z moves) exp.

code:

 

Metric

N001(202706_FD-E_D826_20JUL05_CRH.mc9)

N002(FIX826OP1 POSTED FOR Haas)

O0000

N003G90G80G40G00G53

N004M06T03H03

N005G00X-43.586Y116.851M08

N006S450M03

N007G43Z171.212

N008Z74.212

N009G01Z55.685F400.

N010G41D03X-24.547Y116.199F150.

N011X-10.997Y115.735Z53.289

N012X0.774Y115.343Z51.229

N013X18.995Y114.728Z48.106

N014X19.004Z48.104

N015X19.01Z48.103


Is this something that I can change in the post?

confused.gif

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...