Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Post for Hyundai Hit 15s with Hitrol 840c EZ Control


Bill Witmer
 Share

Recommended Posts

Welcome to the forum.

 

As long as you are asking for help w/ getting your post working You'll find the people here are very helpful.

 

But if you ask straight up for someone to give you a post you will be asking for trouble, and probably a lot of insults.

 

The easiest thing for you to do would be call your reseller and see if he can get you a post that's ready to go. If they can't help then we will certainly help you get a generic one tweaked to work for you.

 

Slepy

Link to comment
Share on other sites
  • 13 years later...

Hello Bill,

 

I have a customer with the same machine as you (HiTrol 840C). We can send NC files to the controller, they are stored in the 'buffer' area.

Cannot store anywhere else.

How do you get them from the 'buffer' area (I think this buffer is a catch-all) to make them executable?

We're sending 'MPF' files- using a post that worked for the previous owner of the machine. 

We only have a problem with how to use the machine.

Thanks.

Paul

 

Link to comment
Share on other sites
21 hours ago, Paul_RagotCADCAM said:

Hello Bill,

 

I have a customer with the same machine as you (HiTrol 840C). We can send NC files to the controller, they are stored in the 'buffer' area.

Cannot store anywhere else.

How do you get them from the 'buffer' area (I think this buffer is a catch-all) to make them executable?

We're sending 'MPF' files- using a post that worked for the previous owner of the machine. 

We only have a problem with how to use the machine.

Thanks.

Paul

 

Get a hold of the MTB and they should be able to assist. You can also go to the Siemens web site and download any of the control manuals.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...