Mastercam Training

[desmotom]

How many levels of training are there for V9 and how far does each level go?

[Guest]

Here's a list of what my reseller offers for classes, your's may be different however.

 

Basic Mill

Intermediate Mill

Advanced Mill

Basic Lathe

Advanced Lathe

Solids

 

Each level goes to the end

 

[desmotom]

I am assuming no 3D in basic

What does intermediate and advance involve?

[Guest]

The advanced class was the one for me that really covered 3D toolpaths.

 

Intermediate, as I remember, was more about getting more out of your 2D toolpaths, dove deeper into manipulating your geometry, creating and working on different planes.

[desmotom]

Going for training just see where I will fit in, I'm thinking advanced

[Racer X]

Hijack alert

 

Desmotom? Would that be short for Desmodromic Tom?

 

Hijack off.

[Kevangel]

"a Ducati Hi-jack"

[P_Scott]

desmotom,

 

Training from each reseller may be slightly different. Contact yours and see what they can offer you. There are also plenty of online resources such as Streaming Teacher, a subscription service where you can download and work with as many tutorials as you want within the allotted timeframe. In House Solutions, the host of this website and forum, offers a number of excellent tutorial manuals which you can view and order from the "Books" link above. None of the online resources however can replace a good class with a knowledgable instructor. You can always ask the instructor a question directly. Books often have the information you're looking for but it takes longer. HTH

[desmotom]

Thanks for your input everybody

 

Ducks are awesome(desmo)