Show X, Y & Z Location In Verify

[Lowell Davidson AP Green]

While running Verify I like to watch my coordinates of my Z depth. I am looking to see if anyone can help me. In MasterCam 9.1 under the VERIFY CONFIGURATIONS there was an option to DISPLAY CORDINATES. Can anyone tell me if this option is still available in MasterCam X2?

[Guest]

Welcome to the Forum Lowell

 

 

If you look in the lower left hand corner while backplotting it will show the values there.

 

Is that what you are looking for?

[Lowell Davidson AP Green]

Thanks John for your input.

 

Yeah I'm aware that it shows you in the Backplot mode. But I was looking to see it in Verify mode.

[Span]

Welcome Lowell,

 

Just check the verbose box in verify.

[Lowell Davidson AP Green]

DJB

 

Thanks for your help. That is exactly what I was looking for.

[Jack Neelands™]

grab your verify window and drag it down just a little bit and you will see in a grey box the postition that the tool is at in relation to the program and what G code is being used ....you may want to slow your step and refresh to 1 to see this even better and you can follow every move with the verbose checked

...too slow sorry

[kunfuzed]

Hey Jack, what's that!

[DavidB]

That is an Australian Car mate.

Down under there called a Commodore.

The V8 version is a Chev engine called a Gen3 it's 5.7 litre.

In Australia they just releast the new VE commodore range the V8 is now a Chev Gen4 6.0 litre.

Holden Australia

 

Here is my VX Commodore SS 5.7litre V8 6 speed Manual

[Greg Williams]

Dave,

 

Do the new ones still have pushrods?

[DavidB]

Greg,

Yes and you still have to put a crank in through the radiator to turn them over

[Greg Williams]

So they have made advancements then?

[DavidB]

Yeh they even have things called lights, radios, windows and steering wheels now.

 

You should trade your horse and cart in on 1.

[Jack Neelands™]

Mine was blue and a few years older ...thanks for the Link David ....nice to see you have a taste for speed as well