Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

filtering


TonyK
 Share

Recommended Posts

I'm cutting two alum. cores, same part, on 2 differt machines. One is a Makino S56 the other

a mazak VTC 16-A. The parts on the makino are

coming out in sharper detail. Picture a piece of slate. The steps between the layers and

edges have a more rounded look on the parts coming off the mazak. The toolpath are the same

except the filter on the makino toolpaths is turned off since the machine doesn't use arcs

filter settings on the mazak set to 2:1/0.001.

The customer is OK with the difference since it's

the inside of the part and won't be seen. I'm just wondering what it would take to get them to look the same. Maybe a thighter filter setting.

 

thanks

Tony

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...