How can I seperate these two Comments?
Hello All,
How can I seperate these two comments?
O3091(PART NAME)
(VERSION-)
(SAVE 03091.L14)
(CUSTOMER & PART NAME)
(SK# OPERATION SKETCH)
(CNC-014)
(PREP & ROUGH TURN 1ST OD)----- WOULD LIKE TO MOVE TO ------
N1M150
------ HERE
G0T0101
M05
G0G54X6.2Z.595
These two comments are manual text as comment then the operation comment.
does anyone have any ideas? I see that in the post they both are under pcomment2 one is found on the NCI file lines 1005 and
To All,
I just recieved this from my reseller on how to get Manual text and OP comments to seperate. He also stated that I should post this just in case anyone else wanted to know how it can be done.
It works great thanks Steve, you guys at S4A are great to work with.
Steve E-mail:
Jerry,
Here are the edits to have manual entry come out in header and op comments to stay with the tool change.
Initialize a numeric variable like below;
sof : 1 #Flag