Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Contour3d not follow path


kkominiarek
 Share

Recommended Posts

I've used contour3d in the past with good results, now with this similar part it does not follow the geometry path.

 

I like contour3d as I can use cutter comp. I've put a 2nd op using rolldie which follows the geometry path but does not let you use cutter comp.

 

I'm running this on a HMC.

 

My original plan was to machine a 90deg (plus overlap) quadrant then transform/rotate to complete the other quadrants. The present geo has no overlap in it as I've tried various paths to make it continuous....nothing has worked.

 

I placed a file on cadcams ftp site.

In.....MCX2_files/DEL TEST 03855-0-T1.MCX

 

linky

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...