MULTUS POST ISSUES

[j44snk]

Hi,

 

We have a Multus B-400W, & a In House Solutions post, the original post we were sent was locked & horibly wrong!!!!

We got a new one & there was only a small portion locked.

Our main issue is the new post is not helical milling correctly, it is using G1 instead of G2/G3.

All the settings are correct in the Control definition Screen.

If we run the same file with the original .pst &.psb file the prog comes out correctly but the X&Z were the wrong way around.

Has anyone got any ideas on how I can fix this, we have left messages with our reseller but he usually take a week or two to get back to us, I need help sooner!!!!

[Guest]

chances are the section you need is locked.

 

There is no way to access it if it is..

[j44snk]

Thought as much!!!!

[Hardmill]

Id try running it p2p if your in a pinch.

You may be pleasantly surprised with the

results since you cant output arcs.

 

 

PEACE

[Greg Williams]

If you can access this section of the post we can turn off the linarc function, Also remember that the machine def needs to have arcs set to "Break at quadrants" and using R not IJK

 

Try this one changes are marked #GHW

 

pcir0$ #Pre-circular interpolation postblock

code:

---

 pcir0$           #Pre-circular interpolation postblock

pmap_plane

if posttype$ <> two,

[

preset_mod

pshft_map_xc

if y_axis = zero & millcc = zero,

[

linarc$ = zero

#Set linarc, breakarcs and cir_at_zero

if fmtrnd(xca) = zero & fmtrnd(yca) = zero,

[

#Set breakarcs and cir_at_zero

breakarcs$ = zero

#C axis move

if mach_plane = zero,

[

cir_at_zero = one

czero_csav = csav

]

#Arc output

if mach_plane = two, cir_at_zero = m_one

]

if cuttype = 4, linarc$ = one ##GHW

#if cir_at_zero = zero, linarc$ = one

]

if plane$ <> 0, linarc$ = one

]

if cuttype = -2 & not(millcc), linarc$ = 0 #GHW WAS linarc$ = one 03-11-08

#if cuttype = 6, linarc = one #no arc support on tilted planes - now using G127

!ynci$

---

This will give ya

 

(HELIX CUT HOLE)

(TOOL - 5 OFFSET - 0)

( 16. BULL ENDMILL 1. RAD)

MT=00501

M321

NA21 (RESTART HERE)

G20 HP=4

M110

G94 SB=5000 M242 M63 M175 BA=90. G52 TL=005005

M13

MT=01101

G138

G17

M146

G0 C0.

M147

G127 B90.

G0 X30.77 Y3.

Z220.

Z175.

G1 Z170. F500.

G3 X27.77 Y0. L3. F1500.

X33.87 Y-6.1 Z169.8 L6.1

X39.97 Y0. Z169.6 L6.1

X33.87 Y6.1 Z169.4 L6.1

X27.77 Y0. Z169.2 L6.1

X33.87 Y-6.1 Z169. L6.1

X39.97 Y0. Z168.8 L6.1

X33.87 Y6.1 Z168.6 L6.1

X27.77 Y0. Z168.4 L6.1

X33.87 Y-6.1 Z168.2 L6.1

X39.97 Y0. Z168. L6.1

X33.87 Y6.1 Z167.8 L6.1

X27.77 Y0. Z167.6 L6.1

X33.87 Y-6.1 Z167.4 L6.1

 

Blah Blah Blah

 

X33.87 Y6.1 Z147. L6.1

X27.77 Y0. L6.1

X33.87 Y-6.1 L6.1

X39.97 Y0. L6.1

X33.87 Y6.1 L6.1

X30.87 Y3.1 L3.

G1 Z152. F3000.

G0 Z220.

M12 M174

G126

G136

M146

M109

G0 X1500.

G20 HP=4

M01 (OP STOP)

[j44snk]

WOW, I didn't think I get an usable answer that quick!!!!

 

 

Thanks very much Greg, I do have access to that area of the post & have made the same changes that you have, I'll give it a try on Monday, but it's looking very promising

 

Jason

[bigjohn]

quote:

---

WOW, I didn't think I get an usable answer that quick!!!!

---

Considering it's a weekend.

 

 

===========

[Allan]

j4snk, we would gladly edit your post, but it has never been purchased or binned to anything other a dealer sim? If your reseller is so slow to get back to you why would you not contact In House Solutions directly?

 

Allan