X4 import ops....parameters in ops different!

[Scott Garrison@Weiler Engineering]

All,

 

I have 2 parts with a 3d shaped runner in them that are a left hand and right hand version. After programmming one hand, I have another file for the opposite hand which I imported the ops including geometry and mirrored it. When I coded it the program file lengths were about 10% different. So I looked at some of the operations. Well, the imported ops had differences in the total tolerance dialogue area.

The total tolerance went from .001 to .0003 thereby making the prog. larger. Some arc filtering settings were changed also. Anyone else ever see this? I think I'll be sending this one on to my reseller and CNC software.

 

Thanks,

 

Scott

[Thee Rickster ™]

I do notice that when you import tool paths from a folder where you saved some common individual tools,

the feeds and speeds switch back to default.

[Scott Garrison@Weiler Engineering]

Pretty lame if you ask me....that operation should come in EXACTLY the same.

[Tony35]

quote:

---

that operation should come in EXACTLY the same.

---

+10000000000