Is "peel mill " for open slots only ?

[mig]

Is " peel mill" for open slots only ?

What if the slot for o-ring (for example) ?

[Tony35]

use dynamic milling

 

HTH

[Josh Kinney -Elite Engineering]

I use it for contours all the time.

[Jack Sierra Cad/Cam]

What is the problem your having?

[mig]

Josh , what do you mean "for contours"?

SCC1 - my problem is I can't ramp into "close " slot like o-ring groove for example.

[Josh Kinney -Elite Engineering]

I use it for all kinds of shapes. Just plung out a clearance area to enter the groove.

[Jack Sierra Cad/Cam]

If you go to the mastercam help and search for Peel Mill. It will bring up a description of peel mill and how to chain it. Hopefully this will help you understand how to use it properly.

[mayday]

peelmill needs a lot of work. most functions dont work properly. It ignors the end of chains and entend with a negitive value sends the path positive. Be carfull with it. We need a peelmill path that uses surfaces to drive to. In fact take all the 2d HS paths and allow surf/solids as drive/check.