MU3

[RandleXX]

I notice a little more Spaceball drift in verify with MU3

[mig]

Just wondering if filtering problem been fixed?

I still not turning Arcs when using filter for HST

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=034970

[peon]

Mig, I posted that issue, but since MU2, I have not had any problems with the arc filter. So far, so good!!!

[mig]

Thanks peon . Good news.

What post you using ?

For X4 or converted from previos vertions?

[peon]

I'm using posts converted from previous versions and modified fanuc posts from X4. I also set my control defs to break at quadrants and specify min arc radius = .010" and max arc radius = 99. in the arc filter settings within the toolpath parameters. Verify works MUCH faster!

[mig]

Thank you peon for the tips ?

What diferent for filtering does it make when you break arks?

[peon]

If you program a complete circle, the code will output four arcs when you set you control def to break at quadrants. It was suggested by a few users on this forum. Apparently, if you don't break the arcs into quadrants, the arc filter can make mistakes.

[rdshear]

Colin, I couldn't bother you for a copy of that list as well could I??

 

Thanks,

 

Rick