Speed change help

[George Gerhard]

Good Morning All

I have a post that correctly outputs a M03 S4000

however sometimes with the same tool I want to change the speed, and the post will output the M03 and the new speed.

On this particular machine if the spindle is running and another M03 is issued the spindle will stop.

I am looking for some guidance as to how I can block out the M03 on speed changes

 

thank you

George

[connormac]

in my post this controls null tool change stuff

 

ptlchg0$ # Null tool change

if mi3$ = 0, comment$, e$

if workofs$ < 1, workofs$ = 1

if mi2$ = 0, n$, sgwcs, e$

if mi2$ = 0, n$, xr$, yr$, e$

p_moo1

if prv_ss$ <> ss$, n$,"M03", ss$,e$

if mi3$ = 1, comment$, e$

!opcode$

 

 

I think if you look at yours and find this, that is where you would start.

I think in this post I would take out the

"M03". Try starting there.

HTH

Connormac

[George Gerhard]

thank you, Im on it