Change NC File name

[Nelson D'Souza]

Can any one help me how to post toolpaths with the list numbers of operations used in Mastercam, without editing the change NC file name for every operation.

 

I want to post all operations while cliking on the toolpaths group.

 

After posting each NC file names should refer with the list number of operations in mastercam.

 

Is this out put controlled by the post processor or is there any setting in mastercam parameters?

[bhayden10]

Click the group name so it highlights all operations and then right click edit operations change nc file name. That will change all of the processes at once.

[Toonz]

If you go into Settings: Configuration: Toolpath Manager you can set it so that your Toolpath Group will be the NC file name that all operations will adopt as you create them.

[Nelson D'Souza]

Thanks....i did it,by keeping default settings as toolpaths manager->NC file->prompt->always...

 

Nelson