Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Missing operations


Thompson Ind
 Share

Recommended Posts

We just upgraded to X4 and are still getting used to it. One problem we have come across alot is in some files when all the operations are selected to make G code, not all of the operations show up in the NC file. It seems to happen after we have made G code and then go back in and add another operation. Has anyone else experienced this?

Link to comment
Share on other sites

quote:

It seems to happen after we have made G code and then go back in and add another operation

When you add another operation, select all the operations you want to post together then right click in the operation manager and go to "Edit selected Operations>Change NC File name" Select OK and Done, now they should all post out.

 

HTH cheers.gif

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...