Edit Home Position

[Russh67]

Hello Everyone:

 

I'd like to remove the X0. at the end of my gcode so it easier to unload and load parts.

 

Is this easy? I am relatively new to post editing. I desperately want to learn.

 

What I'm getting is this at the end:

 

G0Z.1

M5

G91G28Z0.

G28X0.Y0.

M30

%

 

What I want is this:

 

G0Z.1

M5

G91G28Z0.

G28Y0.

M30

%

 

Thank you very much!!

 

Russ

[Ivan Mikesic]

Hi Russ,

 

This line is most likely coming from peof$.

 

It will look something like this.

 

pbld, n$, *sg28ref, "X0.", "Y0.", e$

 

You can change it to the following to remove the X0.

 

pbld, n$, *sg28ref, "Y0.", e$

 

Basically, you will want to delete the X0. in quotation marks.

 

Hope this helps.

 

Hello Everyone:

 

I'd like to remove the X0. at the end of my gcode so it easier to unload and load parts.

 

Is this easy? I am relatively new to post editing. I desperately want to learn.

 

What I'm getting is this at the end:

 

G0Z.1

M5

G91G28Z0.

G28X0.Y0.

M30

%

 

What I want is this:

 

G0Z.1

M5

G91G28Z0.

G28Y0.

M30

%

 

Thank you very much!!

 

Russ

[Russh67]

Thank you Sir:

 

I am noticing there are alot of places where *sg28ref is in the post. Should I be deleting all of them? All the x0.'s I mean.

 

Thank you again

[Russh67]

I see it where the heading says end of Tool path post block, pretract.

 

It's good thanks alot.