Analyze Dynamic X5

[kkominiarek]

When using analyze dynamic(which I use frequently)the arrow always appeared where you selected the surface/solid/wire....now it appears 180 deg

from where I selected the geometry. A PIA if your zoomed in on an area.

 

Also 40% of the time the arrow will not ride on the highlighted surface....it will float in space or ride on an adjacent surface. I have to select surface 2-3-4 times to get it to work.

 

 

Another X5 issue is my mouse/cursor will act like it is creating rectangles randomly 3-4 times thru out the day.

It does not create rectangles but dragging the cursor over the screen leaves white rectangles on the screen till I hit escape.

 

Graphics card settings possible cause?? (i have a NVIDIA Geforce 9800 GT)

Any suggestions for a fix?

[K2csq7]

Have you downloaded the latest driver from Nvidia? They are always coming out with updated drivers, and it is the first thing I do when I see something that should not be.

[kkominiarek]

"Another X5 issue is my mouse/cursor will act like it is creating rectangles randomly 3-4 times thru out the day.

It does not create rectangles but dragging the cursor over the screen leaves white rectangles on the screen till I hit escape."

 

 

 

See attached file/doc.

 

These random rectangles are driving me nuts. I updated mt drivers...but not help.

 

Any suggestions?

X5 random rectangle on screen.doc

[K2csq7]

Mine will do that if I hit zoom window and accidentally zoom with the mouse wheel before beginning to make the window by holding the left mouse button.

Maybe try a driver recommended by solidworks, I have heard they are sometimes better than the Nvidia drivers..

 

solidworks drivers