Need some programing help

[bmilford]

It looks like I am going to be overwhelmed with work in the near future and we would like to see if anyone has any extra time to help with some programing time.

I would like some one to take our geometry and then create toolpaths that I can then load on my machine and post the NC code.

 

The stuff we are working on are pieces for making bathware patterns, so they are somewhat large (our machine has 2 5'x10' tables with 3' of Z)

We cut styrofoam 1/2" undersize, then coat the styrofoam with a machine-able putty, then we cut the putty .1" oversize for roughing, then -.005" for finishing.

 

We use X5 MU1 router level 3, multiaxis, with solids, our machine is Thermwood M67 5 axis router, and for creating geometry we use Autodesk Inventor, I can bring the model into MC and then send the MC file out.

 

I have no idea how to handle payment for the programing time so if anyone has any suggestions please let me know.

 

Thanks,

Brian

[MATT Q]

Brian,

P.m. me and we can maybe discuss what you are needing. I run a m67 10' 10' x 3' thermwood right now cutting patterns may be able to help out.

[cncman59]

Brain

I am not sure if you have found a solution? If you still need help let me know!

I use X4 not X5 but I am fimiliar with the Thermwood model 67 router with 2 - 5 x 5 tables

Good luck

Eric

[mowens]

My guess would be, he found a solution or discovered a flaw in his question.

[crazy^millman]

Hope so after a year.