Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Solids Help


jagg2499
 Share

Recommended Posts

I am pretty new to creating solids and am looking for a tip on how to creaet something. I have a large solid face and I am looking to create a pocket with an angled bottom. What I am trying to create basically looks like a whistle notch with a vertical wall not a perpendicular one. Any direction would be a great help thanks in advance guys.

FILE.MCX-5

Link to comment
Share on other sites

On level 500 I created geometry for the profile, extruded it down to the bottom, Then made a 30 degree surface and trimmed the solid to the surface, once that was done I did a Boolean remove and subtracted my solid feature from the whole body.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...